Sync Your Sunpie Lights: Color Matching Tutorial for RGBW & Rotating Series

When using the Sunpie RGBW Rock Lights in combination with the Rotating Series Headlights or Fog Lights, you may occasionally experience mismatched colors when controlling the halos through the app. This video provides a detailed guide on how to sync the lighting effects via the app to ensure all colors are perfectly consistent.

If your individual or combination lights are experiencing color synchronization issues—where the displayed colors do not match the settings on your remote—you can also use this method to reset them and restore normal operation.

Alternatively, you can watch the video below to see how to proceed.

Step-by-Step Sync Guide for Sunpie RGBW & Rotating Series.

Step 1: Isolate the Controllers If you have both the RGBW Rock Lights and Rotating Series Headlights/Fog Lights connected, you must first power down one set completely. For example, disconnect the power to the Rock Light controller so that only the Headlight/Fog Light controller is active. Ensure the "Sunpie LED Light" app is only connected to the active controller's Bluetooth signal, then tap the Settings icon in the top-right corner.

Step 2: Access Dream Settings Once in the settings menu, locate and select the "Dream Settings" option.

Step 3: Configure the Output Sequence Under the "Dream Settings" header, swipe up on the "Please select a device" menu. Select the device ID (e.g., Dream#6EDB). Locate the "RGB Output Sequence" dropdown menu and change the setting to "RGB". Leave all other settings as they are and tap the "OK" button at the bottom to save your changes.

Step 4: Sync the Second Controller Power off the Headlight/Fog Light controller and reconnect the power to the RGBW Rock Light controller. Repeat the steps above to change its RGB Output Sequence to "RGB" and save. Once both are set, you can repower all controllers. Your lighting colors should now be perfectly synchronized.