LED Tail Lights with Factory BSM Mount & Connector for 2018-2027 Jeep Wrangler JL, JLU & 4xe
Specifications
Operating Voltage: 12V DC
Power Draw by Function: Running Light: 3W · Reverse Light: 12W · Brake Light: 25W
Ingress Protection: IP67
Housing / Lens: Black ABS base with clear PMMA optics
Lighting Functions: Running, brake, turn signal, and reverse
Factory BSM: Mounting slot and connector provided; original modules must be reused
Product Features
Upgrade your Jeep Wrangler with SUNPIE LED tail lights featuring a distinctive red perimeter and four lighting functions: running, brake, turn signal, and reverse. Each tail light has a dedicated mounting slot and connector for the original blind spot monitoring (BSM) module.
Reuse Your Factory BSM Module
If your Wrangler came with factory blind spot monitoring, transfer the original module from each factory tail light into the mounting slot on the corresponding SUNPIE tail light, then connect it to the BSM plug. BSM modules are not included. These tail lights do not add blind spot monitoring to vehicles that did not come equipped with it.
Four LED Lighting Functions
- Running Light: The red perimeter lights up.
- Brake Light: The upper and lower red LED sections illuminate steadily when you brake.
- Turn Signal: The upper and lower red LED sections flash to signal a turn.
- Reverse Light: The center white LED lights up when you shift into reverse.
Wiring & Construction
The main tail light plug connects to the vehicle’s factory tail light harness. An anti-flicker resistor helps prevent flickering and bulb-out warnings. The lights feature a black ABS base, clear PMMA optics, and an IP67 rating.
Fitment
Fits 2018–2027 Jeep Wrangler JL (2-door) and JLU (4-door), including Wrangler 4xe models.
- With factory Blind Spot Monitoring (BSM): Transfer the original BSM modules to the dedicated mounting slots on the SUNPIE tail lights and plug them into the provided BSM connectors. Factory BSM modules are not included.
- Without factory BSM: The tail lights can be installed on compatible Wrangler models without factory BSM. The BSM connectors remain unused, and the tail lights do not add blind spot monitoring.