Sunpie Rock Lights Not Working? - Troubleshooting

If your Sunpie rock lights are not working, here are some troubleshooting steps you can try:

1. Check the power source: Ensure that the rock lights are properly connected to a power source, such as the vehicle's battery or an auxiliary power supply. Make sure the wiring is intact and securely connected.

2. Inspect the bulbs: Verify that the bulbs are securely installed and not damaged. If a bulb is burned out or broken, it may need to be replaced.

3. Test the power supply: Use a multimeter or voltage tester to check if power is reaching the rock lights. If there is no power, check the fuse box for any blown fuses related to the rock lights. Replace any blown fuses with new ones of the same rating.

4. Check the switch or controller: If your rock lights are controlled by a switch or a controller, make sure it is functioning correctly. Test the switch or try using a different controller (if available) to see if that resolves the issue.

5. Inspect the wiring: Examine the wiring for any signs of damage, such as cuts, fraying, or loose connections. Repair or replace any damaged wiring as necessary.

6. Verify the ground connection: Ensure that the rock lights have a proper ground connection. Clean any corrosion or dirt from the grounding point and ensure it is securely connected.

7. Seek professional assistance: If you have tried these troubleshooting steps and are still experiencing issues with your Sunpie rock lights, it may be best to consult a professional technician or contact Sunpie customer support for further assistance.

Sunpie LED Rock Lights Replacement Parts

https://www.sunpie.co/collections/sunpie-rock-lights-replacement-parts